6000 MECHANICAL DUMP BAILERS
The Timer Activated Dump Bailer is used for accurate placement of cement, acid, or other fluids downhole.
The Dump Bailer is pressure equalized, and can be activated by a Timer Unit or with an E-line Trigger.
When the Timer is activated, a valve will open at the bottom of the Dump Bailer.
This will allow the fluid inside to leave the Dump Bailer.
The Dump Bailer is designed as a modular system, and can be built up by sections to accommodate the needed volume required for the job.
The Timer Section can be adapted to all Dump Bailer sizes.
6100 TYPE GS PULLING TOOLS
AND ACCESSORIES
TEXT HERE... The MK-2 plug/packer system is designed as a modular system to make it easy to convert to straddle packer applications.
This also makes it possible to use it as a straddle packer with different sizes of the lower and upper packer sections.
TEXT HERE... Ratings are similar as on the Single Pack MK-1 system.
6120 TYPE S PULLING TOOLS
AND ACCESSORIES
TEXT HERE... The Model “B” Sleeve Valve Cement Retainer is a high quality tool for squeeze cementing.
The sleeve valve is controlled from the surface by simply picking up to close and setting down to open.
The Model B Plug is also supplied in a Bridge Plug version.
TEXT HERE... Conversion to tubing set or Bridge Plug is easy and requires minimal parts.
The retainer sustains high pressure and temperatures.
TEXT HERE... Can be supplied with Nitril, HNBR or AFLAS elements.
Optional the SVCR can be set on a Mechanical, Hydraulic running or E-Line tool from PTR.
6300 BELL GUIDES AND ACCESSORIES
TEXT HERE... The HM Bridge Plug is designed to simplify plugging operations.
TEXT HERE... Full tubing ID is available after releasing from the plug, allowing other equipment to extend through the end of the Tubing String.
TEXT HERE... The need for a Setting Tool does not exist, due to the Built-in setting mechanism.
This makes the HM Bridge Plug to an excellent alternative for plugging deviated and horizontal wells.